The Red and Black Satin Underbust Corset is excellent for Renaissance, Pirate, and Steampunk costuming as well as special occasion wear. Wear with a chemise and Renaissance skirt for a Renaissance styled outfit; layer over a dress for a Medieval or Fantasy look; wear with a chemise and layered pixie skirts for a Pirate style; or wear with a high-collared shirt and bustle skirt for a Steampunk look!
Red satin panels alternate with panels of black satin, and is finished with black satin at the top and bottom. The corset is laced with a black ribbon. This corset is comfortable and supportive, with 20 flexible spiral steel bones, a steel busk with two flat steel stays for extra front support, and four flat steel stays to support the back grommets. Constructed with three layers of fabric: two inner layers of sturdy cotton twill, waist tape, and the silk outer layer. There are four garter loops (no straps included) attached at the inside bottom seam.
Please remember that all screens show colors differently, and the corset you receive may slightly vary from the color you see on your device.
Dimensions in Inches:
Center front: 11.75″ with a 10″ busk
Side length: 9.5″ – 9.75″
Center back: 12.75″
Under bust to hip: 10.25″ – 10.5″
Our classic style has a 4″ rib spring and 7″ hip spring. (This is the difference between the circumference of the ribcage or the hip measurement compared to the waist measurement of the corset when fully closed.) Our steel-boned corsets are intended to be worn with a one inch gap or more between the laces after cinching.